Alkaline Hydrogen Evolution Reaction Research Articles

From Quinary Co–Cu–Mo–Pd–Re Materials Libraries to Gas Diffusion Electrodes for Alkaline Hydrogen Evolution

AbstractDeveloping a hydrogen evolution reaction (HER) electrocatalyst that can steadily drive a large current density is of great significance for industrial electrochemical water‐splitting technology. Herein, the compositionally complex noble‐metal‐lean system Co–Cu–Mo–Pd–Re is investigated for alkaline HER by a scanning droplet cell‐assisted high‐throughput screening of co‐sputtered thin‐film material libraries. The identified hit compositions are used to prepare a catalyst‐coated Ni foam‐based layer that is hot‐pressed with a specifically designed PEEK‐covered carbon‐based gas diffusion layer to obtain a novel‐design gas diffusion electrode (GDE). H2 bubbles that collect on the electrode surface are effectively reduced by controlling the hydrophobicity of the catalyst layer of the GDE, hence enabling a high current (−1 A cm−2) operation for HER in alkaline water electrolysis.

Effects of Intrinsic Defects in Pt-Based Carbon Supports on Alkaline Hydrogen Evolution Reaction.

Carbon material has widely been utilized in the synthesis of efficient carbon-supported Pt (Pt/C) catalysts, in which the structural properties greatly influence the electrocatalytic performances of Pt/C catalysts. However, the effects of intrinsic defects in carbon supports on the performance of the alkaline hydrogen evolution reaction (HER) have not been systematically investigated. Herein, porous carbon supports with different degrees of intrinsic defects were prepared by a simple template-assisted strategy, and the resulting samples were systematically studied by various analytical methods. The results suggested that the presence of abundant intrinsic defects (vacancy and topological defects) in the carbon support was advantageous in terms of favoring the dispersion and anchoring of Pt species, promoting electron transfer between Pt atoms and the carbon support, and tuning the electronic states of Pt species. These features improved the HER performance of Pt/C catalysts. Compared to the nontemplate-assisted carbon-supported Pt catalyst (Pt/NTC) with an overpotential of 178 mV, the optimized template-assisted carbon-supported Pt catalyst (Pt/TC) exhibited a lower overpotential of 58 mV at 10 mA cm-2. Besides, the Pt/TC catalyst displayed better HER durability than the Pt/NTC catalyst owing to its strong metal-support interaction. The DFT calculations confirmed the important role played by intrinsic defects (vacancy and topological defects) in stabilizing Pt atoms, with Pt-C3 coordination identified as the most favorable structure for improving the HER performance of Pt. Overall, novel insights on the significant contribution of intrinsic defects in porous carbon supports on the HER performances of Pt/C catalysts were provided, useful for future design and fabrication of advanced carbon-supported catalysts or other carbon-based electrode materials.

Operando Spectroscopic Monitoring of Metal Chalcogenides for Overall Water Splitting: New Views of Active Species and Sites

AbstractMetal‐based chalcogenides exhibit great promise for overall water splitting, yet their intrinsic catalytic reaction mechanisms remain to be fully understood. In this work, we employed operando X‐ray absorption (XAS) and in situ Raman spectroscopy to elucidate the structure–activity relationships of low‐crystalline cobalt sulfide (L−CoS) catalysts toward overall water splitting. The operando results for L−CoS catalyzing the alkaline hydrogen evolution reaction (HER) demonstrate that the cobalt centers in the bulk are predominantly coordinated by sulfur atoms, which undergo a kinetic structural rearrangement to generate metallic cobalt in S−Co−Co−S moieties as the true catalytically active species. In comparison, during the acidic HER, L−CoS undergoes local structural optimization of Co centers, and H2 production proceeds with adsorption/desorption of key intermediates atop the Co−S−Co configurations. Further operando characterizations highlight the crucial formation of high‐valent Co4+ species in L−CoS for the alkaline oxygen evolution reaction (OER), and the formation of such active species was found to be far more facile than in crystalline Co3O4 and Co‐LDH references. These insights offer a clear picture of the complexity of active species and site formation in different media, and demonstrate how their restructuring influences the catalytic activity.

The Micron-Droplet-Confined Continuous-Flow Synthesis of Freestanding High-Entropy-Alloy Nanoparticles by Flame Spray Pyrolysis.

Alloying multiple immiscible elements into a nanoparticle with single-phase solid solution structure (high-entropy-alloy nanoparticles, HEA-NPs) merits great potential. To date, various kinds of synthesis techniques of HEA-NPs are developed; however, a continuous-flow synthesis of freestanding HEA-NPs remains a challenge. Here a micron-droplet-confined strategy by flame spray pyrolysis (FSP) to achieve the continuous-flow synthesis of freestanding HEA-NPs, is proposed. The continuous precursor solution undergoes gas shearing and micro-explosion to form nano droplets which act as the micron-droplet-confined reactors. The ultrafast evolution (<5ms) from droplets to <10nm nanoparticles of binary to septenary alloys is achieved through thermodynamic and kinetic control (high temperature and ultrafast colling). Among them, the AuPtPdRuIr HEA-NPs exhibit excellent electrocatalytic performance for alkaline hydrogen evolution reaction with 23mV overpotential to achieve 10mA cm-2, which is twofold better than that of the commercial Pt/C. It is anticipated that the continuous-flow synthesis by FSP can introduce a new way for the continuous synthesis of freestanding HEA-NP with a high productivity rate.

Facet‐Junction Induced Strong Metal Support Interaction for Enhanced Alkaline Hydrogen Evolution Reaction

AbstractStrong metal‐support interaction (SMSI) plays a critical role in enhancing the catalytic performance of electrocatalysts. Currently, effective approaches to enhance the SMSI effect in supported electrocatalysts still need to be developed, and a comprehensive atomic‐level understanding of the underlying reaction mechanisms remains unclear. In this study, a novel facet‐junction strategy is proposed to enhance the SMSI between the loaded Ru atoms and the Co3O4 support. By modulating the ratio of exposed facet for (111)/(100) crystal plane in Co3O4, the hydrogen evolution reaction (HER) performance can be dramatically enhanced by 560% and can achieve a Pt‐like HER activity with the overpotential of 45 mV. Detailed analysis with atomic‐resolution integrated differential phase contrast (iDPC)‐scanning transmission electron microscopy (STEM), atomic‐resolution high angle annular dark field (HADDF)‐STEM, and electron energy loss spectroscopy (EELS) further proved that with proper (111)/(100) crystal plane ratio, the intensified charge distribution near the facet‐junction region would modify the electronic structure around the active sites. This work provides new insights to enhance the SMSI and will contribute to the rational design of highly efficient electrocatalysts for water splitting.

Molybdenum-doped tungsten nitride coated with carbon shell and cobalt hydroxide nanosheets for efficient alkaline hydrogen evolution reaction

Water electrolysis is currently the most important way to achieve large-scale hydrogen (H2) production. Although many nonprecious electrocatalysts possess promising catalytic performance at low current density below 50 mA cm−2, it remains a substantial challenge to realize H2 production at industry-compatible current density over 500 mA cm−2. Here we have designed a hierarchical heterostructure of molybdenum-doped tungsten nitride coated with carbon shell and cobalt hydroxide nanosheets (Mo-WN@NC@Co(OH)2) for alkaline hydrogen evolution reaction (HER) with industrial current density and stability. The hybrid exhibits efficient alkaline HER activity, reaching the current density of 500 mA cm−2 at an overpotential of 196 mV. The Co(OH)2 nanosheets and Mo doping endow the composite with more active sites and enhanced intrinsic activity of the catalyst, as well as an appropriate water dissociation energy. In addition, the free energy of activation for each step during the HER process suggests a synergistic effect of Mo doping and Co(OH)2 in Mo-WN@NC@Co(OH)2 promoting surface Volmer and Heyrovsky steps during the HER process. This doping and interfacial engineering methods hold great promise for fabricating efficient nitride-based electrocatalysts for electrochemical energy devices.

Unique sandwich-cookie-like nanosheet array heterojunction bifunctional electrocatalyst towards efficient overall water/seawater splitting

Construction of multi-component heterostructures is an effective strategy for electrocatalysts to improve both the hydrogen evolution reaction (HER) at the cathode and the oxygen evolution reaction (OER) activity at the anode. Herein, an efficient bifunctional electrocatalyst towards overall water/seawater splitting (OW/SS) is reported with strategy of heterostructure construction (ruthenium/nickel phosphorus) on nickel hydroxide (Ni(OH)2). With the unique hydrolysis layer (Ni(OH)2), the processes of H2O hydrolysis and the adsorption/desorption of H*/O-containing intermediates (OH, O, OOH) were greatly boosted by Ru and P sites, which acted as the catalytic active centers of OER and HER, respectively. In addition, the electronic structure reconfiguration was realized through the strong interaction between multi-interfaces. For alkaline HER at the current density of 10 mA cm−2, the overpotential of Ru-P-Ni(OH)2/NF (denoted as RNPOH/NF) was 98 mV, whereas just 230 mV of overpotential was essential to stimulate alkaline OER at the current density of 20 mA cm−2. Specifically, as a bifunctional electrocatalyst towards overall water splitting, RNPOH/NF deserves cell voltages of 1.7/1.92 V and 1.75/1.94 V, respectively, to activate current densities of 50/100 mA cm−2 in alkaline water/seawater systems, together with a good durability of 12 h. This work contributes insights to the development of bifunctional electrocatalysts for overall water/seawater splitting.

Exploration of transition metal atom-doped NiSe2 electrocatalysts for efficient alkaline hydrogen precipitation using first principles screening

Transition metal (TM) doping exhibits great potential in designing high-performance two-dimensional (2D) NiSe2-based catalysts for electrocatalytic hydrogen evolution reaction (HER). 22 TM atom-doped 2D-NiSe2 catalysts are screened, and the effects of TM doping on the thermal stability and HER catalytic activity are investigated by first-principles calculations. Among them, Cu doped 2D-NiSe2 might exhibit remarkable HER properties with the water dissociation energy of 1.03 eV and H adsorption Gibbs free energy of −0.05 eV. Furthermore, we elucidate the reasons behind the different HER activities. These findings suggest new possibilities for the application of Cu doped 2D-NiSe2 for alkaline HER, offering new perspectives for future research.

Three‐dimensional‐printed Ni‐based scaffold design accelerates bubble escape for ampere‐level alkaline hydrogen evolution reaction

AbstractAlkaline hydrogen evolution reaction (HER) for scalable hydrogen production largely hinges on addressing the sluggish bubble‐involved kinetics on the traditional Ni‐based electrode, especially for ampere‐level current densities and beyond. Herein, 3D‐printed Ni‐based sulfide (3DPNS) electrodes with varying scaffolds are designed and fabricated. In situ observations at microscopic levels demonstrate that the bubble escape velocity increases with the number of hole sides (HS) in the scaffolds. Subsequently, we conduct multiphysics field simulations to illustrate that as the hole shapes transition from square, pentagon, and hexagon to circle, where a noticeable reduction in the bubble‐attached HS length and the pressure balance time around the bubbles results in a decrease in bubble size and an acceleration in the rate of bubble escape. Ultimately, the 3DPNS electrode with circular hole configurations exhibits the most favorable HER performance with an overpotential of 297 mV at the current density of up to 1000 mA cm−2 for 120 h. The present study highlights a scalable and effective electrode scaffold design that promotes low‐cost and low‐energy green hydrogen production through the ampere‐level alkaline HER.

Two-dimensional flake Co/Co2N0.67 modified by molybdenum oxides achieves enhancement of bifunctional hydrogen electrocatalysis

To address the urgent need for non-precious metal-based catalysts in the industrial preparation and application of hydrogen energy, we present a secondary hydrothermal strategy to prepare a Mo-modified cobalt carbonate precursor, resulting in the Mo–Co/Co2N0.67 catalyst. The cobalt-based materials exhibit a layered flake structure due to molybdenum modification, exposing more active sites, while molybdenum oxide modification enhances hydrogen evolution reaction (HER) and hydrogen oxidation reaction (HOR). In alkaline HER measurements, Mo–Co/Co2N0.67 achieves a remarkable current density of 10 mA cm−2 at only 27 mV. The overall water splitting of Mo–Co/Co2N0.67 + RuO2 can reach 10 mA cm−2 at 1.52 V voltage. In alkaline HOR measurements, it exhibits the current density of 2.92 mA cm−2@0.1 V vs. RHE and an exchange current density (J0) of 2.96 mA cm−2. This work highlights the effective regulation of non-noble metal-based electrocatalysts through Mo modification, providing valuable insights for the development of efficient non-precious metal-based hydrogen electrocatalysis within the context of anion exchange membrane unitized reversible fuel cells (AEM-URFC).

Electrochemical Synthesis of Hollow Nanoparticles via Anodic Transformation of Metastable Core-Shell Precursors.

Recent advances in electrosynthesis of nanomaterials expanded structural and compositional variations accessible by the electrochemical method; however, reliably synthesizable morphological variety fall shy of that available by conventional solvothermal synthesis. In this communication, electrochemical preparation of surfactant-free hollow nanoparticles is demonstrated. By anodic conversion of core-shell precursors with metastable cores, hollowed nickel nanoparticles with uniform dimensions were synthesized and characterized. Implementation of TEM grids as the working electrodes, identical location tracking of the morphological evolution of single particles to anodic stimulus has been demonstrated. The synthesized nanoparticles were employed as catalysts for the alkaline hydrogen evolution reaction and exhibited catalytic rates that compare favorably to the Pt/C benchmark. This marks the first pure electrochemical synthesis of hollow nanoparticles and shall contribute to the structural diversification of electrosynthesized nanomaterials.

Coupling Interaction between Precisely Located Pt Single‐Atoms/Clusters and NiCo‐Layered Double Oxide to Boost Hydrogen Evolution Reaction

AbstractCatalysts based on Pt single atom (SA) on metal oxides have shown tremendous potentials for alkaline hydrogen evolution reaction (HER), but they are severely limited by insufficient electron interactions of Pt sites and supports. Herein, a new methodology is developed to precisely locate Pt SAs and Pt clusters into NiCo layered double oxide (LDO) nanosheets, achieved using a dual‐ion etching process with subsequent phase transformation method. Uniquely, the Pt SAs are inserted into LDO layers to form Pt─Co bonds by occupying partial Ni positions, significantly strengthening electron interactions with NiCo LDO and promoting activity of HER. Results from density functional theory calculations indicate that the H* species are preferentially absorbed onto O sites on top of these Pt SAs, which are coupled with their adjacent Pt clusters to accelerate water dissociation in the Volmer step. As‐obtained Pt─NiCo LDO exhibits a low overpotential of 92 mV at 10 mA cm−2 and a Tafel slope of 73 mV dec−1, an excellent stability over 105 hours at 60 mA cm−2, and its mass activity is 6 times higher than commercial 20% Pt/C. This study highlights essential functions of coupling interactions between Pt SAs/clusters and LDOs to boost HER for hydrogen energy production.

Construction of Co-Se-W at Interfaces of Phase-Mixed Cobalt Selenide via Spontaneous Phase Transition for Platinum-Like Hydrogen Evolution Activity and Long-Term Durability in Alkaline and Acidic Media.

Cost-effective transition metal chalcogenides (TMCs) are highly promising electrocatalysts for both alkaline and acidic hydrogen evolution reactions (HER). However, unsatisfactory HER kinetics and stability have severely hindered their applications in industrial water electrolysis. Herein, a nanoflowers-shaped W-doped cubic/orthorhombic phase-mixed CoSe2 catalyst ((c/o)-CoSe2-W) is reported. The W doping induces spontaneous phase transition from stable phase cubic CoSe2 to metastable phase orthorhombic CoSe2, which not only enables precise regulation of the ratio of two phases, but also realizes W doping at the interfaces of two phases. The (c/o)-CoSe2-W catalyst exhibits a Pt-like HER activity in both alkaline and acidic media, with record-low HER overpotentials of 29.8mV (alkaline) and 35.9mV (acidic) at 10mA cm-2, respectively, surpassing the vast majority of previously reported non-precious metal electrocatalysts for both alkaline and acidic HER. The Pt-like HER activities originate from the formation of Co-Se-W active species on the c-CoSe2 side at the phase interface, which effectively modulates electron structures of active sites, not only enhancing H2O adsorption and dissociation at Co sites, but also optimizing H* adsorption to ΔGH* ≈ 0 at W sites. Benefiting from the abundant phase interfaces, the catalyst also displays outstanding long-term durability in both acidic and alkaline media. This article is protected by copyright. All rights reserved.

MoS2 supported Ruthenium nanoparticles with abundant sulfur vacancies significantly improved hydrogen evolution reaction

The electrochemical hydrogen evolution reaction (HER) has become one of effective ways to produce hydrogen. MoS2 is a promising electrocatalyst for the HER, and loading noble metal atoms on MoS2 support can further enhance its HER activity. In present work, the CO was employed as a structure-directing agent to in situ synthesize MoS2-n (n = 0, 0.5, 1.0, 1.4 and 2.0 MPa, representing the CO pressure). Among them, the MoS2-1.4 with highest amounts of sulfur vacancies and superior alkaline HER performance was selected as the support for Ru loadings. Sulfur vacancies can stabilize Ru nanoparticles, prevent nanoparticles from aggregating, and facilitate the formation of small-sized nanoparticles. By optimizing the loading amounts of Ru, the 5Ru@MoS2-1.4 with the Ru loading of 5 wt.% and nanoparticle size of 2 nm exhibits the best alkaline HER activity by displaying a low overpotential of 55 mV and Tafel slope of 68.6 mV dec−1 at a current density of 10 mA cm−2 in 1.0 M KOH medium. This can be majorly related to the synergistic effect of MoS2-1.4 support and small-sized Ru nanoparticles, wherein the CO plays a significant role in regulating the structure of MoS2-1.4 support that favors dispersion of Ru nanoparticles. Generally, present work provides a strategy to enhance the HER catalytic performance of MoS2, which is favorable for other highly-efficient catalyst design.

Multistage structural self-supported electrode via structural engineering on carbon nanofibers for efficient hydrogen evolution reaction at high current density

Pt-based catalysts suffered from the wastage of active sites, resulting in unsatisfactory actual catalytic performance and poor durability as non-self-supporting catalysts for alkaline hydrogen evolution reaction (HER). In this work, we designed a self-supporting electrode material with multi-level structure that utilized carbon nanofibers anchored with cobalt to load and stabilize Pt nanoparticles (Pt@Co/CNFs) for achieving high activity and stability in alkaline HER. The carbon nanofibers served as a framework, with cobalt nanoparticles as an electron donor that can transfer electrons to the metal Pt to accelerating water splitting. In addition, the morphology of the multi-level structure surface was controlled by the content of the reducing agent to giving the material excellent superhydrophilic/underwater superaerophobic properties with ultra-low Pt load (0.29 mg cm−2), which was beneficial for HER. HER test results showed that Pt@Co/CNFs exhibited great catalytic activity, with η10 = 15 mV and η100 = 101 mV. Besides, the stable mechanical structure and the stability of the designed catalytic surface and electron donor in the multi-level structure gave the material exceptional stability. During the 100-hour stability test at 100 mA cm−2, the voltage change was only 50 mV. Besides, utilizing the Pt@Co/CNFs self-supporting electrode directly in the AEM water electrolysis system, a cell voltage as low as 2.18 V was achieved at 500 mA cm−2. Impressively, it demonstrated operational stability for over 200 h without noticeable decay. This work provides a promising approach for the development of advanced self-supporting electrode catalysts.

Highly Active W2C-Based Composites for the HER in Alkaline Solution: the Role of Surface Oxide Species.

The hydrogen evolution reaction (HER) is a crucial electrochemical process for the proposed hydrogen economy since it has the potential to provide pure hydrogen for fuel cells. Nowadays, hydrogen electroproduction is considerably expensive, so promoting the development of new non-noble catalysts for the cathode of alkaline electrolyzers appears as a suitable way to reduce the costs of this technology. In this sense, a series of tungsten-based carbide materials have been synthesized by the urea-glass route as candidates to improve the HER in alkaline media. Moreover, two different pyridinium-based ionic liquids were employed to modify the surface of the carbide grains and control the amount and nature of their surface species. The main results indicate that the catalyst surface composition is modified in the hybrid materials, which are then distinguished by the appearance of tungsten suboxide structures. This implies the action of ionic liquids as reducing agents. Consequently, differential electrochemical mass spectrometry (DEMS) is used to precisely determine the onset potentials and rate-determining steps (RDS) for the HER in alkaline media. Remarkably, the modified surfaces show high catalytic performance (overpotentials between 45 and 60 mV) and RDS changes from Heyrovsky-Volmer to Heyrovsky as the surface oxide structures get reduced. H2O molecule reduction is then faster at tungsten suboxide, which allows the formation of the adsorbed hydrogen at the surface, boosting the catalytic activity and the kinetics of the alkaline HER.

Boost alkaline hydrogen evolution reaction by intermetallic charge transfer in perovskite ruthenate encapsulated in ZIF-67 derived cobalt sulfide nanoparticles

Constructing and manipulating heterostructure is an effective strategy to prepare electrocatalysts with excellent performance for water electrolysis. Herein, an efficient alkaline hydrogen evolution reaction (HER) electrocatalysts, Co3S4-embedded in carbon-encapsulated BaRuO3 (BaRuO3@CS-0.1), was synthesized through the sacrificial template method of ZIF-67 encapsulated BaRuO3 precursors. By inheriting the exceptional merits of different ingredients, this heterostructure catalyst BaRuO3@CS-0.1 enables intermetallic charge transfer between Ru and Co with boosted HER kinetics, and thus displaying higher catalytic activity towards HER, as evidenced by the intensively theoretical calculations and experimental measurements. BaRuO3@CS-0.1 exhibits excellent HER performance, with the lowered overpotentials of 26 mV to achieve 10 mA cm−2 in comparison to the pristine BaRuO3 (51 mV), which is also superior to Pt/C catalyst at large current density. Moreover, this heterostructure also demonstrates comparable oxygen evolution reaction (OER) activities with the representative electrocatalysts, delivering current densities of 10 mA cm−2 at a potential of 1.546 V for overall water splitting. These findings provide a rational route to optimize the performance of bulk electrocatalysts and endow them with richer electrochemical activity through this composite strategy.

Strain regulation of bond length in single Ru sites via curving support surface for enhanced hydrogen evolution reaction

The intrinsic activity of single-atom catalysts is influenced by the local electronic structures of metal centers, with existing modulation strategies limited to adjacent atomic coordination. However, the impacts of support surface geometry on local bonding environment, and thus electronic structures of single-atom centers have rarely been known. Here, we prepared highly curved B,N co-doped carbon-supported ruthenium catalyst with an ultra-low Ru loading of 0.4 wt%, which exhibited an ultrahigh turnover frequency (TOF) of 10 H2 s−1 (38 times that of Pt/C) and superior stability in alkaline hydrogen evolution reaction (HER). We found that curving support surface induced the strain, resulting in 1.5% compressed Ru-N and 4% stretched Ru-B bonds, leading to the accumulation of positive charge and quenching of spin polarization at Ru sites, thereby achieving the optimal binding of H* and enhanced performance for HER. This work highlights the significant support effects upon the structural design of active sites.

Constructing N-Containing Poly(p-Phenylene) (PPP) Films Through A Cathodic-Dehalogenation Polymerization Method.

Developing the films of N-containing unsubstituted poly(p-phenylene) (PPP) films for diverse applications is significant and highly desirable because the replacement of sp2 C atoms with sp2 N atoms will bring novel properties to the as-prepared polymers. In this research, an electrochemical-dehalogenation polymerization strategy is employed to construct two N-containing PPP films under constant potentials, where 2,5-diiodopyridine (DIPy) and 2,5-dibromopyrazine (DBPz) are used as starting agents. The corresponding polymers are named CityU-23 (for polypyridine) and CityU-24 (for polypyrazine). Moreover, it is found that both polymers can form films in situ on different conductive substrates (i.e., silicon, gold, ITO, and nickel), satisfying potential device fabrication. Furthermore, the as-obtained thin films of CityU-23 and CityU-24 exhibit good performance of alkaline hydrogen evolution reaction with the overpotential of 212.8 and 180.7mV and the Tafel slope of 157.0 and 122.4mV dec-1, respectively.

Identifying the Active Sites in MoSi2@MoO3 Heterojunctions for Enhanced Hydrogen Evolution.

Developing Two-dimensional (2D) Mo-based heterogeneous nanomaterials is of great significance for energy conversion, especially in alkaline hydrogen evolution reaction (HER), however, it remains a challenge to identify the active sites at the interface due to the structure complexity. Herein, the real active sites are systematically explored during the HER process in varied Mo-based 2D materials by theoretical computational and magnetron sputtering approaches first to filtrate the candidates, then successfully combined the MoSi2 and MoO3 together through Oxygen doping to construct heterojunctions. Benefiting from the synergistic effects between the MoSi2 and MoO3, the obtained MoSi2@MoO3 exhibits an unprecedented overpotential of 72mV at a current density of 10mA cm-2. Density functional theory calculations uncover the different Gibbs free energy of hydrogen adsorption (ΔGH*) values achieved at the interfaces with different sites as adsorption sites. The results can facilitate the optimization of heterojunction electrocatalyst design principles for the Mo-based 2D materials.